Analog Output Field Interface Module 4-20mA
Applications :
Analog Output Field Interface Modules with option of fuse in each path used for Interfacing PLC/DCS Analog Outputs to field or field devices. Protection against short circuit is provided in each channel through Fuse.
TECHNICAL DATA
Input Data (FIELD SIDE):
| Field Signal: | 4-20mA / 1-5V / 1-10V |
| Protection : | Fuse in each path |
| Termination | Plug In Connector (D Type) |
Output Data (SYSTEM SIDE)
| System Signal | 4-20mA |
| Isolation | 3 Way |
| Termination | Plug In Connector (D Type) |
Component Specification:
| Fuse Link | Glass Fuse (5 x 20mm) |
| Fuse Holder | Vertical / Horizontal |
| Terminals | Screw Type (2.5Sq mm) |
| PCB | Glass Epoxy Double Sided |
General Data
| No. of Channels | 4 / 8 / 16 |
| Test Voltage | 500V in each Channel |
| Mounting | Universal Dinrail Mountable |
| Identification Tag | Optional (On request) |
Standards & Approval
| *PCB: Type tested STQC, IEC 61373, |
| *ANSI IPC 319 MIL 275B |
| *Terminals: UL/CE & CSA |
| *Ambient Opt Temp: | Max 60 Deg.C |
| *Relative Humidity: | Max 90% (Non-Condensing) |
| TYPE OF CARD |
Length |
Width |
| BRM4-AO-D15 | 75 | X | 92 |
| BRM8-AO-D25 | 190 | X | 92 |
| BRM16-AO-D25 | 210 | X | 126 |