Digital Input Field Interface Module With Relay (Redundant)
Applications :
DI Redundant Field Interface Modules with Relay and Autotest features used to Interface between PLC/DCS Redundant Digital Inputs to field devices. Provision to diagnose all Digital Inputs of PLC/DCS with the help of Auto High or Auto Low Signal
TECHNICAL DATA
Input Data (FIELD SIDE):
| Field | 24VDC, 110VAC, 230VAC |
| Protection | Fuse in Each Path |
| Type of Connection | 2 Wire Interogaton Reading. |
| Termination | Terminals |
| Indication/Chnl | LED |
Output Data (SYSTEM SIDE)
| System Signal | 24VDC (2 O/p’s per channel) |
| Protection | Fuse (Fuse Fail Indication) |
| Termination | Plug In Type D type Connector |
Input and Output Gavanically Isolated
Component Specification:
| Fuse | Glass Fuse(5x20mm) 100mA |
| Fuse Holder | Vertical / Horizontal |
| Terminals | Screw Type (2.5Sq mm) |
| PCB | Glass Epoxy Double Sided |
| Relay: | 2C/o -24DC/110AC/230AC |
General Data
| No. of Channels | 16 |
| Test Voltage | 24DC/110VAC/230VAC |
| Mounting | Universal Dinrail Mountable |
| Identification Tag | Optional (On request) |
Standards & Approval
| *PCB: Type tested STQC, IEC 61373, |
| *ANSI IPC 319 MIL 275B |
| *Terminals: UL/CE & CSA |
| *Ambient Opt Temp: | Max 60 Deg.C |
| *Relative Humidity: | Max 90% (Non-Condensing) |
| TYPE OF CARD |
Length |
Width |
| BRM16-24DDI(AT-RED)-2B-D25 | 300 | X | 126 |
| BRM16-110ADI(AT-RED)-2B-D25 | 400 | X | 126 |
| BRM8-230ADI(AT-RED)-2B-D25 | 400 | X | 126 |
